Fully Biological Sewage Treatment Plants for Domestic and Industrial Wastewater up to 3,000 PE
AQUATO® ORKA
Our ORKA plant is a sewage treatment plant suitable for the biological treatment of domestic and industrial wastewater. Wastewater treatment takes place in multi-chamber containers depending on your desired treatment process.
Technology that convinces – from AQUATO®
-
•
Excellent effluent values, even under overload and underload conditions
-
•
Low sludge removal
-
•
No odor nuisance
-
•
Adaptable to all tank geometries
AQUATO® ORKA
How Does the ORKA Work?
The ORKA uses the SSB® process. This system developed by us is a single-stage aeration plant with integrated sludge stabilization. The processes are temporally separated (intermittent operation) and take place in a regular cycle specified by the control system.
Aeration Phase: In the first chamber, the raw wastewater is pre-clarified. At the same time, air is blown in so that the natural treatment processes can start.
Settling Phase: The activated sludge sinks to the bottom of the chamber. A clear water zone forms in the upper area.
Discharge Phase: The treated water from the clear water zone is conveyed to the discharge. Subsequently, the excess sludge is returned to the first chamber and the SSB® cycle begins again.
Only aerobically stabilized sludge is produced, which hardly needs to be disposed of. This saves you considerable costs.
Our ORKA can also be designed as an SBR plant. Please feel free to contact us at any time with an inquiry.
How Does the ORKA Work?
The ORKA uses the SSB® process. This system developed by us is a single-stage aeration plant with integrated sludge stabilization. The processes are temporally separated (intermittent operation) and take place in a regular cycle specified by the control system.
Aeration Phase: In the first chamber, the raw wastewater is pre-clarified. At the same time, air is blown in so that the natural treatment processes can start.
Settling Phase: The activated sludge sinks to the bottom of the chamber. A clear water zone forms in the upper area.
Discharge Phase: The treated water from the clear water zone is conveyed to the discharge. Subsequently, the excess sludge is returned to the first chamber and the SSB® cycle begins again.
Only aerobically stabilized sludge is produced, which hardly needs to be disposed of. This saves you considerable costs.
Our ORKA can also be designed as an SBR plant. Please feel free to contact us at any time with an inquiry.
The Components of the AQUATO® ORKA
Aeration Unit
Lifting Unit
Plant Control
Coarse Material Separation
Container
Rectangular Concrete Construction
Circular Concrete Construction
ORKA in Plastic Container
Sampling Options
Sampling Chamber
Sampling Chamber PE
Sampling Chamber Type 300
Concrete Enclosures
Concrete Enclosure
Smart Tools and Extensions: Digital Intelligence for Your Wastewater Plant
Expand the functionality of your AQUATO® sewage treatment plant systems with our intelligent tools and modules. We offer you customized solutions for advanced control, comprehensive monitoring and optimized efficiency.
Control
Smart Extensions
Makes your K-PILOT IoT-capable for remote access and cost savings.
Control
Smart Extensions
Makes your K-PILOT IoT-capable for remote access and cost savings.
Additional Treatment Stages
H-Module
Chemical-free UV disinfection for maximum hygiene and water reuse.
CL-Module
Cost-effective chlorine disinfection to meet specific requirements.
P-Module
Effective phosphate elimination for the protection of sensitive water bodies.
C-Module
Stable nitrogen removal even with fluctuating plant load.
H-Module
Chemical-free UV disinfection for maximum hygiene and water reuse.
CL-Module
Cost-effective chlorine disinfection to meet specific requirements.
P-Module
Effective phosphate elimination for the protection of sensitive water bodies.
C-Module
Stable nitrogen removal even with fluctuating plant load.
References
250 PE – Above-Ground Treatment Plant, Ahrtal
-
•
Replacement treatment plant for the destroyed wastewater infrastructure
-
•
Above-ground installation of the treatment plant, fed by a preceding pumping station
-
•
Mechanical pre-treatment utilizing a vertical screw screen located in the pump shaft
-
•
Soundproof installation of the aeration technology within an external stone enclosure
500 PE – Construction of a New Community Wastewater Treatment Plant
-
•
Construction of a complete system using large-volume plastic tanks for wastewater purification in a small settlement.
-
•
Complete pre-assembly of the treatment technology into the tanks by AQUATO® at the factory.
-
•
Fail-safe system design achieved through the operation of two autonomous lines.
-
•
Implementation of an upstream screw screen for coarse solids retention and protection of downstream technology.
FAQs
You have questions? We have answers!
For which application areas is the AQUATO® ORKA suitable?
The AQUATO® ORKA is a versatile sewage treatment plant suitable for the fully biological treatment of domestic and industrial wastewater. It is designed for plants up to 3,000 population equivalent and offers sustainable solutions for large wastewater volumes.
What advantages does the AQUATO® ORKA offer in terms of maintenance and operation?
The ORKA plant is low-maintenance and convinces with low-wear technology. It operates without electrical components in the water, which increases durability. In addition, it is characterized by low power consumption and cost-effective maintenance.
Can the AQUATO® ORKA be adapted to existing tank structures?
Yes, the AQUATO® ORKA is extremely flexible and can be adapted to all tank geometries and sizes. It is suitable for installation in both concrete and plastic containers and offers a wide variety of inlet and outlet conditions.
Ready to Assist.
Let our expertise guide you. Contact us for a personalized consultation and receive detailed information about our systems and available extensions.
Provide your email – we’ll contact you soon.
